Follow these easy steps to get your Zanussi ZDEB 47209W Dryer up and running in no time.
Before using the Zanussi ZDEB 47209W Dryer for the first time, wipe the dryer drum with a damp cloth or run a brief drying cycle (approximately 30 minutes) with damp cloths inside to remove any residues produced during production.
Ensure all transport packaging is removed before use. Open the loading door, pull off adhesive strips from inside the machine on top of the drum, and remove the foil hose and polystyrene padding from the machine.
To install the vent hose, choose the most convenient vent outlet from the options at the back, left, or right-hand side. Attach the hose by pulling the ring nut from the vent outlet at the back, screwing it onto the hose, and pushing it firmly back into place.
Place the dryer close to your washing machine for convenience. Ensure it is in a clean location where dirt does not accumulate. Make sure the dryer is not standing on the electrical supply cable.
Position the dryer on a firm, level surface to minimize vibration and noise. Use a spirit level to check if the dryer is level. Adjust the feet as needed to ensure it is properly leveled.